Monthly Archives: May 2018

  • Rj Link’s Vision Provides Customers With Quality Products

    Posted on May 31, 2018 by Ann McGirk in news.

      Our Mission: “A solution provider in the Global Power Transmission Market for design, manufacture & assembly of custom gearboxes” It takes vision to provide a quality product.  Our reputation is on the line with everything our customers deliver. That’s the assurance of a quality Gearbox manufacturer. Customers can’t afford failures. This means our products […]

    Continue Reading...
    Comments Off on Rj Link’s Vision Provides Customers With Quality Products
  • Gearbox Repairs, Rebuilds & Replacements

    Posted on May 29, 2018 by Ann McGirk in news.

    Rj Link Int. continues to see an increase in demand for gearbox repairs, rebuilds and replacements.   Some of the gearboxes are being used in river and shoreline development.  Customers send their gearboxes to Rj Link for evaluation to find out the extent of the damage.  After evaluation, Rj Link’s engineering team helps the customer to make an educated decision on a repair, […]

    Continue Reading...
    Comments Off on Gearbox Repairs, Rebuilds & Replacements
  • Gearbox Gravity Lubricating Process

    Posted on May 23, 2018 by Ann McGirk in news.

      Did you ever wonder what’s inside your Gearbox?   Rj Link’s “Gravity Lubricating Process” helps gearboxes to run smooth and have an extended life.  Once the gear-housing is filled with the recommended oil and the unit is operating:  The lowest gear dips into the bath of oil lubricating the teeth  Then with splashing action, and meshing of the Gear-teeth, […]

    Continue Reading...
    Comments Off on Gearbox Gravity Lubricating Process
  • Small Package Gear Drives with High Output

    Posted on May 21, 2018 by Ann McGirk in news.

    Rj Link International has seen an increasing customer demand requiring small package Gear-Drives. These types of systems have involved the application/design of several Right-Angle, Variable-Angle, or Planetary systems. Starting with the driver (input-side), providing a variable speed, torque and transferring to the output-side producing an increase/decrease in speed, torque. Our Application/Engineering team, with 75+ years of […]

    Continue Reading...
    Comments Off on Small Package Gear Drives with High Output
  • Rj Link Provides Ground Gearing Components

    Posted on May 17, 2018 by Ann McGirk in news.

    Based on continuous improvements to our product line of gearboxes, Rj Link Int. is proactive in reducing any noise and vibration issues. This is allowing us to achieve increased rpm and higher hp.  Our gearing ranges speeds up to 10,000 rpm, 500 hp input, and we have in-house sizing capability to cut and grind up […]

    Continue Reading...
    Comments Off on Rj Link Provides Ground Gearing Components
  • Transfer Case or Speed Increaser for Centrifugal Pump Application

    Posted on May 14, 2018 by Ann McGirk in news.

    TYPICAL APPLICATION:  Centrifugal Pump   FEATURES: Fabricated steel housing, various input and output shaft configurations, bell housing and input shaft to match appropriate SAE bell housing with clutch, rubber block drive or flange connections.  Similar design mounted horizontally, see D257 https://www.rjlink.com/speed-increasers/model-d257/   Specifications: Ratio 1:1 to 1:3.25 Max HP 650 Input Speed 1,140 Overall Size 34.5 […]

    Continue Reading...
    Comments Off on Transfer Case or Speed Increaser for Centrifugal Pump Application
  • Rj Link Value Added Products & Services -Gearbox Brake Clutch Package

    Posted on May 11, 2018 by Ann McGirk in news.

    A customer came to Rj Link Int. with a gearbox, brake clutch package that needed repair or replacement. The Rj Link team went through and did a cost analysis to determine the extent of repair necessary. The team also compared the cost of the repair versus replacement costs to give the customer another option. After […]

    Continue Reading...
    Comments Off on Rj Link Value Added Products & Services -Gearbox Brake Clutch Package
  • Congratulations to John Oller for Community Partner of the Year Nomination!

    Posted on May 9, 2018 by Ann McGirk in news.

    The Rockford Public School District 205 has nominated Rj Link’s Engineering/Quality Manager, John Oller, for the Community Partner of the Year award.  This nomination recognizes John for his time and talent which he has devoted to the school district this past year.   John has been very heavily involved with District 205’s Roosevelt High School Academy Support Team, and just recently […]

    Continue Reading...
    Comments Off on Congratulations to John Oller for Community Partner of the Year Nomination!
  • Rj Link International-Gearbox Technology

    Posted on May 8, 2018 by Ann McGirk in news.

      Rj Link International is a solution provider in the Global Power Transmission Market for design, manufacture and assembly of custom gearboxes that range from 25 to 1,250 HP and up to 10,000 rpm. Products range from Speed Reducers to Speed Increasers, and Transfer Cases. Custom Designs for a wide variety of OEM’s and distributors […]

    Continue Reading...
    Comments Off on Rj Link International-Gearbox Technology
  • Transfer Case/Speed Reducer for Multiple Applications

    Posted on May 7, 2018 by Ann McGirk in news.

    Typical Applications:  Centrifugal Pump, Feed Mixer, Grain Vacuum   Features:  Various input and output shaft configurations, including tapered shaft, SAE bell housing with clutch, rubber block drive or flange connections.   Specifications: Ratio:  1:1 to 2.9:1 Max HP: 225 Input Speed:  1,000-3,000 rpm Overall Size:  27 x 18.5 x 9 (+bell)

    Continue Reading...
    Comments Off on Transfer Case/Speed Reducer for Multiple Applications