Monthly Archives: January 2019

  • Providing Best in Class Design Performance Gearboxes

    Posted on January 30, 2019 by Ann McGirk in news.

    Rj Link International is always exploring the max performance of our gearbox designs to continuously offer the best performance that our customers expect.  When original designs are released, Rj Link designs to fit the customer’s application and sets the baseline performance of the gearbox. As the customer’s application evolves, Rj Link continuously evolves with them, reviewing […]

    Continue Reading...
    Comments Off on Providing Best in Class Design Performance Gearboxes
  • Rj Link Specialty Gearboxes

    Posted on January 29, 2019 by Ann McGirk in news.

    Specialty Gearboxes Rj Link Specialty Gearboxes are manufactured for specific applications in conjunction with customer specifications. Rj Link’s expertise is a critical component to each application. It enables the customers to focus on core competencies and rely on Rj Link’s engineering and manufacturing expertise. Duty cycles, life expectancy and end use are key factors in the design and manufacturing of Specialty Gearboxes. […]

    Continue Reading...
    Comments Off on Rj Link Specialty Gearboxes
  • Rj Link’s Michael Moss Promoted to President & CEO

    Posted on January 28, 2019 by Ann McGirk in news.

    Rj Link International Inc. is pleased to announce that President & COO Michael Moss has been promoted to President & CEO effective January 1, 2019. For the past 4 years Mike has lead Rj Link’s continued growth and revenue improvements while assuming more of the CEO responsibilities. With over thirty years of Business development and […]

    Continue Reading...
    Comments Off on Rj Link’s Michael Moss Promoted to President & CEO
  • Rj Link & Husqvarna Working in Tandem Creating Leading Flat Saw

    Posted on January 25, 2019 by Ann McGirk in news.

    Husqvarna Construction Products is a world leader in equipment and diamond tools for the construction and stone industries.  Husqvarna’s flat saws are one of the market leaders and are known for their power, ergonomics, torque, maneuverability and reliability. Rj Link International has worked in tandem with Husqvarna since 1995 as a gearbox solution provider to […]

    Continue Reading...
    Comments Off on Rj Link & Husqvarna Working in Tandem Creating Leading Flat Saw
  • Rj Link & WPT Strategic Alliance Benefiting Customers

    Posted on January 23, 2019 by Ann McGirk in news.

    As manufacturing continues to surge in the U.S., Rj Link has been strengthening relationships with suppliers, and finding opportunities to partner with companies to help streamline the development process.     A company that has played a major role in helping Rj Link to offer more complete packages to the end user is WPT Power Corporation.   […]

    Continue Reading...
    Comments Off on Rj Link & WPT Strategic Alliance Benefiting Customers
  • Custom Gearbox for Agriculture Applications

    Posted on January 22, 2019 by Ann McGirk in news.

    Features:  Various input and output shaft configurations, tapered shaft and agricultural PTO connections, SAE bell housings with clutch, rubber block drive or flange connections.   Typical Applications:  Farm Waste Pumping, Feed Lot Grain Handling System, Leaf Vac System.   Specifications:  Ratio:  1:1 to 2:1      1:1 to 1:2 Max HP:  300 Input Speed (rpm):  1,000-2,100 Overall […]

    Continue Reading...
    Comments Off on Custom Gearbox for Agriculture Applications
  • Gearbox in Test Stand for Aircraft Ground Support Equipment

    Posted on January 21, 2019 by Ann McGirk in news.

    Rj Link’s engineering team recently designed a gearbox to be used in a heavy duty foot mounted test stand. The test stand will be used for industrial type transmission testing on ground support equipment for aircraft fueling.   The customer needed to do endurance testing to determine the sheer breakage of the drivelines. The base […]

    Continue Reading...
    Comments Off on Gearbox in Test Stand for Aircraft Ground Support Equipment
  • Two-Speed Designs – DO NOT PUBLISH

    Posted on January 15, 2019 by Ann McGirk in Uncategorized.

    In this application, Rj Link Int. designed a set of four-helical gears that have been integrated with the axle gears to offer the customer an option of two overall distinct ratios.  A sliding clutch to engage/disengage the gear train is used to provide regular & overdrive condition(s).  Regardless of the selection, this is a direct product of the […]

    Continue Reading...
    Comments Off on Two-Speed Designs – DO NOT PUBLISH
  • Custom Gearbox General Product Outline

    Posted on January 14, 2019 by Ann McGirk in news.

    When Rj Link receives requests for custom gearboxes, the engineering team starts off by looking at past products and designs that have been offered.    Gearbox requests might include a clutch, pump, heat exchanger, and/or certain shaft configurations on the input or output side.  Below are some questions that need to be answered to give the engineering team direction on the type of […]

    Continue Reading...
    Comments Off on Custom Gearbox General Product Outline
  • Understanding Applications on the Front End

    Posted on January 10, 2019 by Ann McGirk in news.

    When Rj Link’s engineering team designs a gearbox, the design is based off of the information that is given.   If a customer does not understand their own system, then it will translate back into the gearbox design.   Rj Link has been seeing a trend from companies that are lacking product and application experts. In some […]

    Continue Reading...
    Comments Off on Understanding Applications on the Front End