Monthly Archives: August 2019

  • Airport Snowblower

    Rj Link Gearbox in Airport Snow Blower – Snow Wolf SB-1050

    Posted on August 26, 2019 by Terry McCormick in news.

      Rj Link played a key role in the collaboration success of this high speed snow blower, Snow Wolf SB-1050, built by Airport Technologies Inc. Designed to clear 7,500 tons per hour at 25 mph, casting 85 feet. Two engine machine that dedicates 1,050 HP to the Blower Head alone     Learn more

    Continue Reading...
    Comments Off on Rj Link Gearbox in Airport Snow Blower – Snow Wolf SB-1050
  • Bull wheel gears

    Bull Wheel Gears Before & After

    Posted on August 23, 2019 by Terry McCormick in news.

    Here’s a “before” and “after” look at some bull wheel gears that are getting ready for shipment.  The barstock weighed 500 lbs prior to machining, and are 398 lbs upon completion. The bull wheel gears will go into a power cable pulling machine.   Learn more about Rj Link’s Manufacturing Capabilities    

    Continue Reading...
    Comments Off on Bull Wheel Gears Before & After
  • PTO gearbox for rebuilt manure pump

    PTO Gearbox Solution for Manure Pump

    Posted on August 16, 2019 by Terry McCormick in news.

    Rj Link’s VP of Business Development, Terry McCormick, traveled out to rural Indiana this week to visit with Ben Pickens from Robeson Farm Services.  Ben had contacted Rj Link looking for a PTO gearbox to drive a manure pump that he was looking to rebuild.  Rj Link’s engineering team reviewed the requirements that were needed, […]

    Continue Reading...
    Comments Off on PTO Gearbox Solution for Manure Pump
  • Centrifugal pump

    Speed Reducer for Dredging Applications & More

    Posted on August 15, 2019 by Terry McCormick in news.

    Features:  Flexible mounting connections, SAE bell housing with clutch, rubber block drive or flange connections.   Typical Applications:  Dredging, Air Drilling Reciprocating & Piston Booster Compressor   Specifications:  Ratio:  1.26:1 to 2.96 to 1 Max HP:  600 Input Speed (rpm):  1,800 Overall Size:  25 x 30 x 38  

    Continue Reading...
    Comments Off on Speed Reducer for Dredging Applications & More
  • Custom Gearbox Centrifugal Pump Application

    Posted on August 7, 2019 by Terry McCormick in news.

      Rj Link designed a custom gearbox for a centrifugal pump application.  Some of the features include a fabricated steel housing, various input and output shaft configurations, bell housing with clutch, rubber block drive or flange connections.    Specifications: Ratio:  1:1   to  1:3.25 Max HP:  650 Input Speed (rpm):  1,200 Overall Size:  34 x 36 […]

    Continue Reading...
    Comments Off on Custom Gearbox Centrifugal Pump Application